Hi everyone,
I have two Athom LS4P-WLED controllers, A and B, and three identical LED strips (BTF-LIGHTING WS2811 DC24V 10M Addressable RGB LED Strip 600LEDs). The issue is that each LED strip works fine with Controller A, but only one of the three strips works properly with Controller B. The other two strips blink in random colors upon startup instead of the normal orange light. I only connect one LED strip to a controller at a time I found no difference between the settings of the two controllers. The installation of the two problematic LED strips differs from the one that works with any of the both controllers in that there is an extra 2.5 metres of cable between the strip and the controller, but with the other controller these strips work fine. Firmware version: WLED release 0.14.3
Do you have any idea what could be causing this problem?
If you need, I can upload a video of the issue.
Thank you in advance.