Analog WLED RGBW Starter Kit
 
The starter kit includes: ​ ​
1x LS8P Dual ESP82685 WLED Analog controller
​1x 24V4A Power Adaptor ​
1x 24V RGBW Strip light 5m ​
1x DC Cable ​
1x User Manual
 
Wire Diagram
 
1. Connect the power cable and strip cable to the controller. ​ ​
2. Connect the strip light to the controller, ensuring that VCC is connected to 24V, R/G/B/W accordingly ​ ​
3.Connect the power adaptor to the controller.
 
The LS8P Dual  WLED Controller
 
ESP8285H16 with 2M memory ​
Maximum Curent 16A ​ ​
 
PWM GPIO
R：GPIO5
G：GPIO13
B：GPIO14
CW：GPIO4
WW：GPIO12
 
 
DATA：GPIO1
Button：GPIO0
IR：GPIO2
 
The Analog RGBW Strip Light
 
Voltage: 24V
Length: 5M ​LED: 60leds/m ​
FPCB Width:12mm
​PCB Color: White ​WaterProof: IP20 (None-waterproof) ​
Warm White or Cool White Option
 
The Power Adaptor
 
EU/US/UK Standard Optional ​
AC Input:110-240V 50/60Hz ​
DC Output: 24V4A
 
Tips
 
1. To reset the controller, please press and hold the key more than 10s ​ ​
2. Due to voltage drop, the actual power output of this strip at full brightness is about 70W. But power injection is not neccesary