top of page

WLED  WS2812B Starter Kit

 

The starter kit includes: ​

​1x LS8P-Dual ESP8285 WLED controller ​

1x 5V10A Power Adaptor ​

1x WS2812B 5m ​

1x DC Cable

​1x User Manual

 

Wire Diagram

 

1. Connect the power cable and strip cable to the controller. ​ ​

2. Connect the strip light to the controller, ensuring that VCC is connected to 5V, DAT to D0, and GND to GND. ​ ​

3.Connect the power adaptor to the controller.

 

 

LS8P-Dual RGBCCT Analog and Addressable Digital Strip Controller.

 

This WLED controller support both analog and addressable strip

Build in ESP8285 chipset with 2M flash

 

• Working voltage: DC5-24V
• Output channel: RGBCCT  and 1CH Addressable 
• Output current:  16A
•Max 384W

 

 

PWM GPIO

  • R:GPIO5
  • G:GPIO13
  • B:GPIO14
  • CW:GPIO4
  • WW:GPIO12

 

 

  • DATA:GPIO1
  • Button:GPIO0
  • IR:GPIO2

 

The WS2812B Strip Light

 

Length: 5M

LED: 60leds/m

FPCB Width:10mm

PCB Color: White

WaterProof: IP20 (None-waterproof)

 

The Power Adaptor

 

EU/US/UK Standard Optional

AC Input:110-240V 50/60Hz

DC Output: 5V10A

 

Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP02.bin.gz"

 

Tips

 

1. To reset the controller, please press and hold the key more than 10s

 

2. Upgrade to oifficial firmware might disable some function.

 

To build your own firmware please visit: https://github.com/athom-tech/

 

3. Due to voltage drop, the actual power output of this strip at full brightness is 28W. To achieve equal brightness along the entire length of the strip, we recommend using high-quality wire (not included) to inject power at both ends, which requires a total power input of 42W

 

WLED 5V ESP8285 WS2812B Kit

85,00$ Standardpreis
59,50$Sale-Preis
    bottom of page