I haven't adopted my devices into esphome device builder. Is there a list of tested firmware versions or should I just adopt the devices and trust ESPHome device builder?
I see copies of config at https://github.com/athom-tech/esp32-configs
in case I need to back out.
Currently I have three types of Athom Sensors:-
PS02C3MZ LD2450
by Athom Technology
hi there , i just bought a esphome-rf433-ir-remote-controller and it works great , but can i take control of it in my esphome builder page/app or wil it break things? greetz Bob
All my athom esp8285 devices won't boot after a grid outage. They are units without relay and with. When the grid goes out and the power comes back, they appear to lock up. Not connected to wifi, don't engage the relay if set to be always on etc. Don't respond to button presses.
Seems to be a design flaw in the esp8285 range, as I also have athom esp32 devices and these all start correctly after the grid outage. The strange thing is, if I turn the device off and on again, it will boot happily until the next grid outage. So really hard to troubleshoot. Anyone aware of this issue or a fix? I've tried the API reboot, Wifi Reboot settings. But as the unit doesn't appear to boot, these don't kick in. As I said the device appears dead until you unplug it and plug it back in again.
התעסקות עם רכיבי ESPHome והגדרות חומרה תמיד דורשת סבלנות, אבל התוצאה של בית חכם ויציב שווה את כל המאמץ. לא מזמן ניסיתי להגדיר כמה חיישנים ובקרים חדשים אצלי במערכת, ובהתחלה שום דבר לא עבד כמו שצריך בגלל בעיית קונפיגורציה קטנה. אחרי שעות של ניסוי וטעייה, כשזה סוף סוף הסתנכרן, ההרגשה היתה נהדרת. אחרי סוף שבוע כזה אינטנסיבי של תכנות וחיווטים, הרגשתי שאני חייב ניתוק מוחלט מהמסכים כדי להרגיע את הראש. חבר המליץ לי לקחת פסק זמן ולהיעזר בשירות של
כדי ליהנות מחוויה איכותית ומרעננת באווירה אחרת. בסופו של דבר, בין אם מדובר בפתרון תקלות טכניות מורכבות או במנוחה טובה, האיזון הזה בין עבודה קשה לפנאי ופינוק הוא בדיוק מה שמחזיק אותנו ומטעין מחדש.
Every month/2 months all my athom.tech devices disconnect all together. I have a presence sensor/plugs/garage door opener, all esphome devices. After this happens they keep connecting and disconnecting every few minutes.. Resetting doesnt seem to work all to well. And for some reason they are able to connect again. All my other EspHome devices (other brand or self created) don't have this issue, so I am not 100% where the issue is.. I tried updating firmware but issue stays same so I can't check the devices firmware version after updating. please help.
If the device is already working well, I'd be careful before importing or reflashing it through the ESPHome Builder. In many cases you can manage it from ESPHome, but only if the firmware and configuration are compatible. I'd make a backup first to avoid breaking a setup that already works. By the way, while browsing tech communities I also came across https://chickenroadaustralia.org/ — an interesting site with different online content worth checking out in your spare time. Good luck with your project!