Anyone coming here trying to find a solution, FYI I never got it to work again (had the same issue of AP not showing as someone else mentioned before). Had to trash it and go with WLED on esp32. I’d say avoid this product.
I did not upgrade the firmware, unless it did itself. The only reason I went with athom was to use it as a plug and play controller without having to flash firmwares. Otherwise I’d have gone with esp32 to begin with.
I have same issue. Initially found as access point, added wifi, successfuly joined network. Tried to add to homekit which failed. Then it disappeared. Could not find on network and cannot see as access point. Tried several times holding down on/off button for more than 10 seconds. Cannot see as access point.
I managed to reset it but now the leds won't turn on before they did :( I have checked every single thing and i haven't touched the physical leds or the controller itself apart from pressing the butting for more than 10seconds to reset the controller.
Same problem. The Wifi does not appear to connect, and the app fails to discover the Wled controller.
What shall i do?
Please provide instructions on how to reflash the firmware
Anyone coming here trying to find a solution, FYI I never got it to work again (had the same issue of AP not showing as someone else mentioned before). Had to trash it and go with WLED on esp32. I’d say avoid this product.
I have same issue. Initially found as access point, added wifi, successfuly joined network. Tried to add to homekit which failed. Then it disappeared. Could not find on network and cannot see as access point. Tried several times holding down on/off button for more than 10 seconds. Cannot see as access point.
I did that and now it will not show as an AP anymore. What do I do now?
Long press the button for more than 10 seconds