I am trying to calibrate my Tasmota EU power plug.
I corrected 220 volt to 231 volt as measured, that went well.
But for power and also current, it seems like there is some kind of maximum value/limit involved.
For power I tried this,
Measurement = 943 Watt, but max. correction is up to 870 Watt, not higher.
Measurement = 1850 Watt, but max. correction is up to 1730 Watt, not higher.
Is there a ceiling for correction or did I overlook something?
I use cmnd: PowerSet <####.#> , also tried PowerCal ( via MQTT)
Can you help me with this issue?
Here is the info about the powerplug,
Athom Power Monitoring Plug PP01
Build Date & Time2021-12-08T14:47:33
Flash write Count243 at 0xF5000
Restart ReasonSoftware/System restart
Friendly Name 1HenkieSwitch
AP1 SSId (RSSI)SKJL (100%, -50 dBm) 11n
IP Address (wifi)192.168.0.173
MQTT Group Topic 1cmnd/tasmotas/
MQTT Full Topiccmnd/PP01/
MQTT Fallback Topiccmnd/DVES_024C51_fb/
MQTT No RetainDisabled
Chip Id150609 (ESP8266EX)
Flash Chip Id0x1540A1
Flash Size2048 kB
Program Flash Size1024 kB
Program Size616 kB
Free Program Space384 kB
Free Memory26.7 kB