• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Um zu sehen wie dies funktioniert, öffne deine veröffentlichte Website.
    • Kategorien
    • Alle Beiträge
    • Meine Beiträge
    Simon H
    03. Feb.

    Buttons not working

    in Tasmota Related

    HELP! - using Athom 4 way switch with TAS 10.1.0 or TAS 8.5.0, the (touch) buttons don't work. No debug logs, nothing. Works from web UI... template is as describe on both blakadder and athom site: {"NAME":"Athos 4way","GPIO":[576,0,0,33,225,34,0,0,32,224,227,226,35,1],"FLAG":0,"BASE":18} . My WAF factor is going down by the minute..... Any advice? (i had them working 'on the bench'?)....


    PLEASE HELP!!!


    br,


    Simon

    1 Kommentar
    0
    1 Kommentar

    Teile deine MeinungBitte anmelden, um einen Kommentar zu hinterlassen.

    S
    Simon H
    Simon H
    05. Feb.

    Seems that if i take them out of the wall, and power them separately, they work (for a while). Put them back in the wall and they work for a shorter time before the touch buttons become unresponsive.

    I think what is happenning is that the small touch MCU (it has TX & RX lines, so must be an MCU?) is recalibrating the touch sensors badly. And the metal back box/adjacent switches make the calibration fail more easily/quickly.

    Anyway, they are not suitable for purpose.

    Gefällt mir
    1 Kommentar
    Ähnliche Beiträge
    • Switch stopped working, red light in button
    • 2 Gang switch SW1132EU not working after Tasmota upgrade
    • esphome example config for sw032us two button touch switch

    ©2020 by athom.