I just received a wall outlet SK01-TAS-1. I noticed, that a red led comes on while the outlet is being powered and goes off shortly after.
When I turn the outlet on (via the local switch or the UI), there is no indication that the relay is on (except in the UI. Is there a way to program the led so it comes on when the relay is activated?
please try this template
Hmm, by default it should indicate ON state. Have you tried to update to the last firmware - it’s 12.2.0. I do not have it to test, but have you checked Template? As there is LED (or it’s 2 colour?), you definitely can set it to indicate power ON - try to go to Configure Template and change GPIO13 from LedLinki to LED and select 1 (if that’s an option)