• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Um zu sehen wie dies funktioniert, öffne deine veröffentlichte Website.
    • Kategorien
    • Alle Beiträge
    • Meine Beiträge
    hwextreme
    19. Feb. 2021
    Bearbeitet: 19. Feb. 2021

    Only Voltage Reading

    in Plugs

    Received UK plugs, but some only have voltage reading.


    I have calibrated the voltage at this was 30V too high, but there is no current or power reading on some the plugs, is there a console command that is required to enable current measuring?

    I have checked the Tasmota guide and couldnt see one


    00:00:08 RSL: tele/tasmota_6FA40A/SENSOR = {"Time":"1970-01-01T00:00:08","ENERGY":{"TotalStartTime":"1970-01-01T00:00:00","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":243,"Current":0.000}}


    00:06:25 RSL: stat/tasmota_6FA40A/STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_6FA40A","ButtonTopic":"0","Power":1,"PowerOnState":0,"LedState":7,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}

    1 Antwort0 Antworten
    0
    1 Kommentar

    Teile deine MeinungBitte anmelden, um einen Kommentar zu hinterlassen.

    jon
    22. Feb. 2021

    I just purchased 2 of these arrived this morning

    This is what mine shows

    14:02:21 RSL: tele/tasmota_6FA0CE/SENSOR = {"Time":"2021-02-22T14:02:21","ENERGY":{"TotalStartTime":"2021-02-22T13:22:17","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":2,"ApparentPower":17,"ReactivePower":17,"Factor":0.11,"Voltage":237,"Current":0.072}}

    So it is showing current - there is only a small load on mine at the moment hence the small current - Yours is showing 0 so it is showing something I assume you have something connected and switched on?



    What version of firmware are you using this has 9.1 but looks like it has been customised a little by Athom. I have a Sonoff R2 power module which has 9.2 firmware running on it and that works well. Although I see 9.3 is out now

    I presume you are also in the UK if you still have a problem and want to chat you can contact me on the link here

    https://tawk.to/chat/58ac7b9669c2661545c43ee1/default

    Jon


    1
    1 Kommentar
    Ähnliche Beiträge
    • RGB Light Strip Controller’s voltage and current ranges
    • 2812B controller input voltage?
    • PG01 dead

    ©2020 by athom.