This product is temporarily prohibited from being shipped to the EU. Buyers who require shipping to the EU are advised not to place orders. Orders that are placed will be canceled and refunded.
WLED Sounds Reactive Neon Rope Light Starter Kit
The starter kit includes:
1x LS8P ESP32 WLED controller
1x 12V7A Power Adaptor
1x WS2811 Neon Light 5M
1x DC Cable
1x User Manual
Wire Diagram
1. Connect the power cable and strip cable to the controller.
2. Connect the strip light to the controller, ensuring that VCC is connected to 12V, DAT to D0, and GND to GND.
3.Connect the power adaptor to the controller.
The LS8P ESP32 Sounds Reactive WLED Controller
ESP32-WROOM-32E Chipset
2 Channels I2S PDM Digital Microphone Built in
GPIO:
Button(GPIO0)
Relay(GPIO2)
DATA1(GPIO18)
DCLK1(GPIO5)
DATA2(GPIO17)
DCLK2(GPIO16)
IR(GPIO25)
I2S_SDPIN(GPIO32 )
I2S_WSPIN(GPIO15 )
I2S_CKPIN(-1)
The 12V WS2811 Neon Rope Strip Light
Length: 5M
LED: 96leds/m
Width:6mm
Height: 12mm
WaterProof: IP65
The Power Adaptor
EU/US/UK Standard Optional
AC Input:110-240V 50/60Hz
DC Output: 12V7A
Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP32_audioreactive.bin"
The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
top of page
105,00$ Standardpreis
73,50$Sale-Preis
bottom of page