Pre Flashed ESPhome US Plug , Automatically detect by Home Assitant
 
Upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
 
Build in ESP8285 chipset with 2M flash
 
Yaml File Download:  
https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml
 
Specification:
*Input voltage:100-240VAC 50/60Hz
*Current:16A(Max)
*Power rating:2200W
*Wireless standard:IEEE802.11b/g/n,2.4GHz
*Housing Color:Whtie
*Operation Temperature:-20?~+50
*Plastic material:ABS+PC *Fire-protection rating:94-V0
 
GPIOs:
 
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 CSE7766 Rx
GPIO4 None
GPIO5 Button1
GPIO9 None
GPIO10 None
GPIO12 Relay1
GPIO13 LedLinki
GPIO14 None
GPIO15 None
GPIO16 None
FLAG None
 
 
Steps to Install :
 
*Power on the plug
*Use your phone/computer search the SSID: Athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI 
*Go your Home Assitant find the new device and complete installation
 
Product Highlights
US V2 Plug Made For ESPHome is a local smart plug made for ESPHome and Home Assistant. It is suitable for appliance control, scheduling, and Home Assistant automations.
Ideal For
Appliance control
Power monitoring where supported
Schedules and Home Assistant automations
Compatibility
Designed for local smart home use with Home Assistant. Products marked as Made For ESPHome use the correct Made For ESPHome compatibility wording and are intended for ESPHome-based local control.