Notice: This is open source device, fully compatible with Homekit, but not certified by Apple

 

To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Keep in mind that once your HomeKit bridge is set up, it has to be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely.

 

  • Color: RGB+Warm+Cold White
  • Color Temperature: 3000-6000K
  • Brightness: 300 lumens
  • Voltage: 110V~240V
  • Power: 4.5W
  • Base:  GU10
  • Material: Aluminium+Plastic
  • Working Temperature: -25°C~65°C
  • Size: 60x60x115 mm
  • Wireless: WiFi 802.11/b/g/n
  • Control Mode: APP/Voice/Manual
  • Certification: CE, RoHS

 

ESP Home configuration:

 

substitutions:
  devicename: <Enter a name for your light here>

esphome:
  name: $devicename
  platform: ESP8266
  board: esp01_1m

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

# Enable logging to ESPHome
logger:
  # Disable logging to serial
  baud_rate: 0

# Enable Home Assistant API
api:
  password: !secret api_password

# Setup OTA password
ota:
  password: !secret ota_password

# Define output pins
output:
  - platform: esp8266_pwm
    id: output_red
    pin: GPIO4
  - platform: esp8266_pwm
    id: output_green
    pin: GPIO12
  - platform: esp8266_pwm
    id: output_blue
    pin: GPIO14
  - platform: esp8266_pwm
    id: output_warm_white
    pin: GPIO13
  - platform: esp8266_pwm
    id: output_cold_white
    pin: GPIO5

# Define a light entity
light:
  - platform: rgbww
    name: $devicename
    id: $devicename
    red: output_red
    green: output_green
    blue: output_blue
    warm_white: output_warm_white
    cold_white: output_cold_white
    cold_white_color_temperature: 6200 K
    warm_white_color_temperature: 2800 K
    color_interlock: true # avoids simultaneous RGB and W/W
 

 

GPIOs:

 

GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 None
GPIO4 PWM1
GPIO5 PWM4
GPIO9 None
GPIO10 None
GPIO12 PWM2
GPIO13 PWM5
GPIO14 PWM3
GPIO15 None
GPIO16 None
FLAG None

 

Homekit GU10 RGBCW

Artikelnummer: LB10-5W-HK-1
15,50$ Standardpreis
11,63$Sonderpreis