Pre Flashed ESPHome With Bluetooth Proxy WiFi Smart Bulb
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP32C3 4MB
This 12W smart LED bulb is powered by the ESP32-C3 chip and comes pre-flashed with ESPHome firmware for seamless integration with Home Assistant. Supporting RGBCW (Red, Green, Blue, Cool White, and Warm White) channels, it delivers full-spectrum lighting — from vivid color scenes to cozy warm illumination.
With support for Bluetooth Proxy, this bulb can also extend your Home Assistant’s Bluetooth range, making it both a lighting solution and a smart home network enhancer.
Key Features
💡 12W High Brightness Output — Delivers bright and efficient lighting suitable for rooms, offices, and ambient effects.
🌈 RGBCW 5-Channel Control — Independent control of RGB + Cool White + Warm White for infinite color and tone customization.
🔗 Built on ESP32-C3 — Reliable Wi-Fi and Bluetooth connectivity.
⚙️ Pre-Flashed with ESPHome — Instantly recognized by Home Assistant, supports OTA updates, and full YAML customization.
📡 Bluetooth Proxy Support — Works as a BLE extender for your Home Assistant ecosystem.
🔧 Open Source & Flexible — Fully configurable via ESPHome; modify brightness curves, effects, and automation as you wish.
🧠 Local Control, No Cloud — All control runs locally through Home Assistant — no data sharing, no external dependencies.
Compatibility
🏠 Home Assistant (ESPHome Integration)
💻 Works with Wi-Fi and BLE Proxy
🧩 Customizable YAML Configuration for automation, effects, and sensors
| Item | Specification |
|---|---|
| Model | LB01-12W-E27-ESP |
| Base Type | E27 |
| Power Consumption | 12 Watts |
| Input Voltage | AC 100–240V, 50/60Hz |
| LED Channels | Red, Green, Blue, Cool White, Warm White |
| Color Temperature | 3000K – 6500K (Adjustable) |
| Connectivity | Wi-Fi 2.4GHz (802.11 b/g/n), Bluetooth 5 |
| Chipset | ESP32-C3 (RISC-V, Single-Core, 160MHz) |
| Firmware | Pre-flashed with ESPHome |
| Bluetooth Proxy | Supported (requires configuration) |
| Brightness | Up to 1000 lumens |
| Dimensions | 70 × 70 × 135 mm |
| Certifications | CE, RoHS |
| Operating Temperature | -20°C to 45°C |
For Yaml, please visit:
https://github.com/athom-tech/esp32-configs/blob/main/athom-rgbcw-light.yaml
PWM GPIO
- R：GPIO6
- G：GPIO7
- B：GPIO5
- CW：GPIO3
- WW：GPIO4
⚠️ Notes
Works with 2.4GHz Wi-Fi only (no 5GHz support)
To reset to factory mode: power cycle 7 times quickly
⚠️ The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
⚠️ Danger:
If you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.